부품 정보
1 hole 0.062 in. Min and 0.065 in. Maximum diameter located on end knuckle
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
5.460 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
0.094 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
Between 0.191 inches and 0.197 inches
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
3
MRC:
A measurement of the center to center distance between the mounting holes along the length.ADFY
Center To Center Distance Between Mounting Holes Along Length:
0.750 inches
MRC:
Indicates the performance capability of the item or component.AGLD
Performance Type:
Not rated
MRC:
An indication of whether or not a reversible feature is included.AJNC
Reversible Feature:
Not included
MRC:
Indicates the type of hinge which permits either mortise or surface mounting.AKER
Hinge Mounting Type:
Full surface
MRC:
An indication of whether or not a hinge pin is included.AKEW
Hinge Pin:
Not included
MRC:
The number of cylindrical projections through which an axis or pin passes.AKEX
Knuckle Quantity:
6
Leaf Outer Edge To Hole Center Vertical Distance:
0.550 inches
Knuckle Length:
Between 0.491 inches and 0.495 inches
Pin Center To Body Edge Distance:
1.120 inches
Knuckle Inside Diameter:
Between 0.094 inches and 0.099 inches
MRC:
Indicates the type of cylindrical projection through which an axis or pin passes.AKNB
Knuckle Type:
Friction
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Aluminum alloy, qq-a-200/3, alloy 2024, t8511
MRC:
The plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects the surface of the item and its location.ANNR
Surface Treatment And Location:
Anodized, ps13201, class 1, type 2, mcdonnell douglas corporation
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Butt staggered holes