부품 정보
Conformal fuel tank, inboard moldline, aft
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Flat
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.191 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
14.960 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, rounded corners, multi holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
15.340 inches
MRC:
A measurement of a straight line from the midpoint of a rounded corner to its periphery.ADNU
Corner Radius:
2.000 inches
Hole Quantity Along Length:
29
Hole Quantity Along Width:
38
Distance Between Holes Along Length:
0.750 inches
Distance Between Holes Along Width:
0.750 inches
Distance From First Hole Centerline To End Along Length:
0.630 inches
Distance From First Hole Centerline To End Along Width:
0.510 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.100 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Threaded fastener
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Unthreaded hole
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 7075
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/25, t76 federal specification single material response
