MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Metal and synthetic rubber
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.090 inches and 0.110 inches
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-80.0 degrees fahrenheit and 450.0 degrees fahrenheit
MRC:
The length of a straight line which passes through the center of a bolt circle,and terminates at the circumference.ABKG
Bolt Circle Diameter:
Between 8.250 inches and 8.270 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 6.890 inches and 6.910 inches
MRC:
A measurement taken across the bearing surface,in distinction from thickness.ADUV
Bearing Surface Width:
Between 0.200 inches and 0.220 inches
Gage Ring Outside Diameter:
8.260 inches
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
Between 0.110 inches and 0.130 inches
Gage Ring Thickness:
Between 0.070 inches and 0.090 inches
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
70.0 shore durometer a
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
S455-7fsc-83259 mfr ref single material response
