TXT
묘사:
Stud Wire Rope Terminal
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3a
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
Between 0.141 inches and 0.146 inches
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
Between 0.516 inches and 0.610 inches
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.098 inches and 0.103 inches
Undercut Diameter:
Between 0.195 inches and 0.201 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABXG
Overall Length:
Between 3.957 inches and 4.083 inches
Plain Shank Length:
Between 1.438 inches and 1.500 inches
MRC:
The length of a straight line which passes through the center of the shank,and terminates at the circumference.ADCS
Plain Shank Diameter:
Between 0.245 inches and 0.250 inches
MRC:
The length of a straight line which passes through the center of the accommodated material,and terminates at the circumference.AHNK
Accommodated Material Diameter:
0.125 inches
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
0.313 inches
MRC:
The measured load required to break the item in tension.BZQQ
Breaking Strength:
2000.0 pounds
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
28
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.250 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 303se and steel comp 305
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
66 federal standard all material responses
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Threaded
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unf