TXT
묘사:
Pressure Transmitter
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
3.5 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.875 inches
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Dc
MRC:
The number of mounting devices used as a means of attaching the item.ACUP
Mounting Device Quantity:
2
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.ADUM
Overall Thickness:
1.641 inches
MRC:
The means by which the item is actuated.AFLW
Actuation Method:
Metering
MRC:
The number of contacts which provide electrical connection.AFRA
Contact Quantity:
3
MRC:
Indicates the type of contact(s) included on the item.AKSF
Contact Type:
Binding screw
MRC:
The value(s) of potential for which the item is rated.AMSE
Voltage Rating:
12.0 volts and 30.0 volts input
MRC:
The means of attaching the item.AXGY
Mounting Method:
Screw
MRC:
The minimum to maximum value which the item is capable of measuring.BHMW
Measurement Range:
+0.0 to 5.0 inches of water
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
(2) 3/16 inch o.D. Pressure fittings are supplied for prressure connection with 1/4 inch push-on tubing. 3/16 inch i.D. Tubing is suggested for tubing lenghts up to 100 ft. 1/4 inch i.D. For tubing lengths up to 300 ft. 1/4 inch i.D. Tubing lengths up to 900 ft; service: air and non-conductive gases; output: 4 to 20 ma, 2-wire; maximum pressure: 10 psig; loop resistance 0-800 ohms
