TXT
묘사:
Helical Compression Spring Seat
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
Between 2.0550 inches and 2.0850 inches
First Step Diameter:
Between 0.2450 inches and 0.2500 inches
First Step Length:
0.2500 inches
Second Step Diameter:
0.5000 inches
Second Step Length:
Between 0.0500 inches and 0.0600 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 0.1850 inches and 0.1870 inches
MRC:
Indicates the design type of the item.APGF
Design Type:
Solid
MRC:
The length of a straight line which passes through the center of the end of the item,and terminates at the circumference.BBRB
End Diameter:
0.1750 inches
Distance From End To First Step:
Between 1.6050 inches and 1.6350 inches
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, ams 5643
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 630
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5643 assn standard single material response
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
81349-mil-i-6868 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
