TXT
묘사:
Environmental Testing Chamber
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
The number of complete cyclic changes,per unit of time,for which an item is rated.ACZB
Frequency Rating:
50.0 hertz and 60.0 hertz
MRC:
An inside measurement taken at right angles to the length of an item,in distinction from thickness.ADJT
Inside Width:
14.000 inches
MRC:
An outside measurement taken at right angles to the length of an item,in distinction from thickness.ADJV
Outside Width:
20.000 inches
MRC:
An inside measurement between specified points of an item,in distinction from height.AFEF
Inside Depth:
17.000 inches
MRC:
An inside measurement from the bottom to the top of an item,in distinction from depth.AFMQ
Inside Height:
22.000 inches
MRC:
An outside measurement from the bottom to the top of an item,in distinction from depth.AFMW
Outside Height:
28.000 inches
MRC:
The means provided to close the opening of the item.AFPP
Closure Method:
Hinged cover
MRC:
The value(s) of potential for which the item is rated.AMSE
Voltage Rating:
110.0 volts
MRC:
The minimum and maximum operating temperatures at which the item is rated,expressed in degrees celsius.ASQJ
Operating Tempurature Range In Deg Celsius:
-129.0 to 315.0
MRC:
An outside measurement between specified points on an item,in distinction from height.BCXB
Outside Depth:
31.000 inches
MRC:
The means by which the item is heated.BDWT
Heating Method:
Electrical
MRC:
An indication of whether or not a door(s) is provided.BHJQ
Door:
Provided
MRC:
The number of outer doors included.BQMN
Outer Door Quantity:
1
MRC:
Indicates the type of environmental chamber.CWZY
Environmental Chamber Type:
Temperature
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Heaters, 220v single phase 50/60 hz, 6.8 amp; mounts into load frames or use as bench model; used for both material and component tests