부품 정보
Offset height: 0.500 in.
TXT
묘사:
Remote Control Lever
MRC:
The length of a straight line which passes through the center of the largest diameter of the item,and terminates at the circumference.AAZR
Major Diameter:
Between 1.840 inches and 1.850 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
2.300 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
35
MRC:
The length of a straight line which passes through the center of the smallest diameter of the item,and terminates at the circumference.AGJR
Minor Diameter:
Between 1.700 inches and 1.705 inches
MRC:
Indicates the type of bore used on the item.ASBP
Bore Type:
Splined
Center To Center Distance Between Link And Shaft Holes:
2.850 inches
Shaft End Thickness:
0.880 inches
Link End Thickness:
0.335 inches
Link End Hole Diameter:
0.905 inches
MRC:
The means by which the shaft is secured.CZLP
Shaft Securing Method:
Spline
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-601, alloy 356, t6 federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Vertical offset, one hole link end, hole clamp type shaft end
