TXT
묘사:
Bearing Unit Housing
MRC:
The length of a straight line which passes through the center of a bolt circle,and terminates at the circumference.ABKG
Bolt Circle Diameter:
2.7200 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
Between 0.0390 inches and 0.0430 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.1610 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
Between 1.9600 inches and 1.9800 inches
MRC:
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.ADGA
Overall Outside Diameter:
Between 2.9600 inches and 2.9800 inches
MRC:
The length of a straight line which passes through the center of the housing, and terminates at the circumference.AFWB
Housing Diameter:
Between 2.2462 inches and 2.2467 inches
Housing Height:
Between 2.9400 inches and 2.9600 inches
MRC:
A measurement of the longest dimension of the housing,in distinction from width.AFWD
Housing Length:
Between 0.5410 inches and 0.5490 inches
MRC:
Indicates the type of shaft end provided.ANJS
Shaft End Type:
Closed or open
Height From Bottom Of Base To Bore Centerline:
Between 1.4700 inches and 1.4800 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Flange block
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
99207-+3-te1 standard (includes industry or association standards, individual manufactureer standards, etc.).
