부품 정보
5second leg width at angle is 10.130; left side tapers from point 0.75 from angle end to point 3.130 from angle end and 2.07 from left edge; right side lower point is 2.43 from right edge with resulting width from these points down being 5.63 in.
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
2.880 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
4.750 inches
Second Leg Width:
5.630 inches
Second Leg End Width:
4.870 inches
Second Leg Distance Between First And Second Hole Centers Along Width:
2.000 inches
Second Leg Distance Between Second And Third Hole Centers Along Width:
2.000 inches
Second Leg Distance From Edge To Hole Center Along Width:
2.884 inches
Second Leg Distance From Edge To Hole Center Along Length:
1.119 inches
Second Leg Slot Length:
0.875 inches
Second Leg Slot Width:
0.437 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
0.380 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
0.380 inches
First Leg Width:
10.130 inches
First Leg End Width:
9.370 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
Chamfered ends
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
No hole
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
Chamfered ends
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
3 slots
MRC:
An indication of whether or not the second leg is identical to the first leg.CSSP
Second Leg Relationship To First Leg:
Not identical
First Leg Angle:
90.0 degrees
First Leg Chamfer Angle:
45.0 degrees
Second Leg Chamfer Angle:
45.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Titanium alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-t-9046, comp ab-2, condition annealed military specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Primer and paint
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-p-24441/29 military specification 1st treatment response and mil-p-24441/31 military specification 2nd treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Angle