부품 정보
Next higher assembly 6395168. Provision for grease fitting at head. Provision for cotter pin, split ms 24665-413 (cage: 80205). Provided with three radial holes, 120 degrees apart for lubrication. Provided with 0.125 wide x 0.150 deep groove at head on circumference
TXT
묘사:
Fluid Passage Bolt
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Plain
MRC:
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.AASL
Head Diameter:
Between 2.690 inches and 2.810 inches
Concentric Hole Depth:
1.620 inches
Concentric Hole Diameter:
Between 0.123 inches and 0.128 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
3.380 inches
MRC:
A narrative description of the type of end connection.ACKM
First End Connection Type:
Threaded internal pipe
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ACLT
Second End Style Designator:
Plain
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.ACMS
Second End Thread Direction:
Right-hand
MRC:
The length of a straight line which passes through the center of the cotter pin hole,and terminates at the circumference.ADDV
Cotter Pin Hole Diameter:
Between 0.139 inches and 0.144 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Cone assembly
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal thread axis.ATLF
Second End Thread Length:
0.187 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the wrenching feature.BBDF
Wrenching Feature Style:
Round
MRC:
The distance measured along a line parallel to the longitudinal axis of the bolt end to hole center.BBKK
Distance From Bolt End To Hole Center:
0.312 inches
First Diameter From Wrenching Feature:
Between 1.998 inches and 2.000 inches
Length From Bearing Surface Of Wrenching Feature To End Of First Diameter:
3.260 inches
First Radial Fluid Hole Diameter:
Between 0.123 inches and 0.128 inches
Distance From First Radial Hole Center To End Of Bolt:
1.818 inches
Length From Bearing Surface Of Wrenching Feature To Bolt End:
3.260 inches
Wrenching Feature Height:
0.120 inches
MRC:
The designation which is used for the purpose of general identification of the nominal thread size.CRNB
Second End Thread Size:
0.125 inches
MRC:
A designator distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.CRPF
Second End Thread Series Designator:
Npt
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm b443 grade 1 annealed (inconel 625) assn standard single material response
