부품 정보
Bracket, fwd end, center rack
MRC:
Indicates the type of holes provided in the item to facilitate mounting to another item.ACHY
Mounting Hole Type:
Plain
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
1.600 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
2.560 inches
Second Leg Width:
9.940 inches
First Leg Hole Diameter:
Between 0.217 inches and 0.223 inches
Second Leg Hole Diameter:
Between 0.217 inches and 0.223 inches
Second Leg Distance Between First And Second Hole Centers Along Width:
3.500 inches
Second Leg Distance Between Second And Third Hole Centers Along Width:
3.500 inches
Second Leg Distance From Edge To Hole Center Along Width:
1.440 inches
Second Leg Distance From Edge To Hole Center Along Length:
0.747 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
0.188 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
0.188 inches
First Leg Width:
9.940 inches
First Leg Distance Between First And Second Hole Centers Along Width:
3.500 inches
First Leg Distance Between Second And Third Hole Centers Along Width:
3.500 inches
First Leg Distance From Edge To Hole Center Along Width:
1.440 inches
First Leg Distance From Edge To Hole Center Along Length:
0.750 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
Square
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
Three holes
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
Square
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
Three holes
MRC:
An indication of whether or not the second leg is identical to the first leg.CSSP
Second Leg Relationship To First Leg:
Not identical
First Leg Angle:
90.0 degrees
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Right edge has plate, 0.188 in. Thick attached perpendicularly; plate is 4.00 w x 2.56 h with upper right corner cutout 2.40 w x 1.06 h and cutout corner rounded to radius of 0.25 and corners on lower right part cutoff 0.25 x 0.25; plate has 2 slots with radii of 0.110 and distance between centers, 0.262, centered 0.748 from bottom with left arcs centered 0.788 & 3.188 from left edge
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 5052
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm b209, temper h32 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Chromate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-c-5541, class 1a federal specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Angle
