MRC:
Indicates the type of holes provided in the item to facilitate mounting to another item.ACHY
Mounting Hole Type:
Plain
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
0.760 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
1.550 inches
Second Leg Width:
14.330 inches
Second Leg Hole Diameter:
Between 0.194 inches and 0.200 inches
Second Leg Distance Between Hole Centers Along Width:
13.580 inches
Second Leg Distance From Edge To Hole Center Along Width:
0.375 inches
Second Leg Distance From Edge To Hole Center Along Length:
0.378 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
0.060 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
0.060 inches
First Leg Width:
14.330 inches
First Leg Corner Radius:
0.250 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
Corner radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
No hole
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
Square
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
Two holes
MRC:
An indication of whether or not the second leg is identical to the first leg.CSSP
Second Leg Relationship To First Leg:
Not identical
First Leg Angle:
90.0 degrees
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
2nd leg has 2 more holes, 0.139-0.144 in dia, centered 0.976 from open end and 6.356 & 7.262 from left edge; 1st leg has 7 semicircular cutouts on bottom edge with radii of 0.500 - see drawing for location and for placement of markings "a1, a2, ..., a8" and "f1, f2, ..., f8" across first leg and "a1, a2, ..., a8" across second leg; marking to be done in .12 high characters using find no. 1 mil-std-130
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 5052
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm b209, temper h32 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Angle
