MRC:
The process used in manufacturing the item.AARN
Fabrication Method:
Any acceptable
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
12.000 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
37.440 inches
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
0.0600 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Reducer, lcl heat exchangers; asds
MRC:
The style designation indicating the configuration that most nearly corresponds to the basic appearance of the item.AGTA
Basic Shape Style:
Solid
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Left/short side is cutout from point 1.53 in. From top at 55 deg. To point 10.875 down & 12.75 from left edge, then straight down to bottom edge; right side has similar cutout from 1.53 down to point 10.875 down & 12.75 from right edge, then straight to bottom; cover bends up at 4.0 deg. Angle, 1.56 in. From top edge and bends down again, at same angle, 12.00 from top edge; there are 24 holes, 0.096-0.101, drilled thru, 4 each in top and bottom rectangular areas and 8 on each slanted edge - see drawing for details
MRC:
A combination of timed heating and cooling operations applied for the purpose of annealing or hardening the item.HEAT
Heat Treatment:
H-32 strain hardened
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Aluminum alloy 5052, astm b209, temper h32
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 5052, astm b209, temper h32
