부품 정보
Mtg holes on lower piece, p/n 6277586-98, do not go through and are thd 0.12-40 unc-2b, 0.156 in. Dp; two additional thd through holes, 0.112-40 unc-2b
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.500 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
1.190 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
0.425 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
Between 0.137 inches and 0.143 inches
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
2
Distance From Center Of Mounting Hole To Edge Along The Width:
0.187 inches
Center To Center Distance Between First And Second Mounting Holes:
1.280 inches
MRC:
The facility for mounting the item.AZGM
Mounting Facility:
Unthreaded hole
MRC:
A measurement from the bottom to the top of a block,in distinction from depth.BYGG
Block Height:
0.595 inches
MRC:
The number of clamping holes provided.CWTD
Clamping Hole Quantity:
1
MRC:
The length of a straight line which passes through the center of a clamping hole,and terminates at the circumference.CWWM
Clamping Hole Diameter:
1.060 inches all holes and 1.065 inches all holes
Distance From End To First Mounting Hole Center:
0.110 inches
Distance From End To First Clamping Hole Center:
0.750 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 302
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-766 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Oxide
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-c-13924, cl 4 military specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Rectangular
