부품 정보
No.4-40 unc-2b mounting holes are aligned in the shoulder face 89.0 degrees min -91 degrees maximum apart 0.160 in.Min-0.200 in.Max deep on a 0.462 in.Min -0.478 in.Max dia; shoulder face and back and hub end are chamfered at 0.010 in.Min -0.050 in.Max44 degrees min-46 degrees max; shaft access is chamfered at 0.000 in.-0.040in.Max 44 deg.Min -46 degrees maximum both ends; hub is offset from center against shoulder by 0.013 in.Min, 0.017 degrees maximum to form an eccentric; securing hole qty: 1; o/a length: 1.117 in.Min, 1.133 in.Max; securing hole size: 4-40 unc-2b
Shoulder Width:
Between 0.554 inches and 0.570 inches
MRC:
The length of a straight line which passes through the center of the shoulder,and terminates at the outside circumference.AGPX
Shoulder Outside Diameter:
Between 0.742 inches and 0.758 inches
MRC:
The length of a straight line hwich passes through the center of the hub,and terminates at the inside circumference.ALND
Hub Inside Diameter:
Between 0.189 inches and 0.191 inches
First End Hub Outside Diameter:
Between 0.278 inches and 0.280 inches
Distance From First End Hub To Shoulder:
Between 0.555 inches and 0.571 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Comp 303 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Single hub w/ securing hol (s)
