부품 정보
Bearing, ball, annular
TXT
묘사:
Plain Encased Seal
MRC:
The length of a straight line which passes through the center of an item,and terminates at the outside circumference.ABHE
Outside Diameter:
1.128 inches
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-80.0 degrees fahrenheit and 300.0 degrees fahrenheit
MRC:
The length of a straight line which passes through the center of the accommodation for the shaft,and terminates at the circumference.ABVM
Accommodated Shaft Diameter:
0.625 inches
MRC:
A measurement taken between the flat surfaces /front and back/ of the seal,in distinction from thickness.ADUC
Seal Width:
Between 0.234 inches and 0.266 inches
MRC:
The maximum rated speed of the accommodated rotating shaft.AEAT
Accommodated Shaft Maximum Rated Speed:
3600 feet per minute
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the case.BHHL
Case Style:
Recessed
MRC:
The length of a straight line which passes through the center of a circular housing bore,and terminates at the circumference.CPCW
Housing Bore Diameter:
Between 1.123 inches and 1.125 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the sealing element.CTQC
Sealing Element Style:
Angular-opposed
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Speed = 5.000 rpm, radial load = 212lbs, thrust load = 0lbs, min life = 4, 000hrs
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber silicone class q sealing element a
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber silicone class q sealing element b
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Plastic case
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
05047-asme y14.100 professional/industrial association standard and 05047-asme y14.5m-1994 professional/industrial association standard
