부품 정보
Therm-a-gap highly conformable, thermally conductive gap filler, ceramic-filled-silicone elastomer on 5 military aluminum carrier
TXT
묘사:
Solid Rubber Sheet
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Nonmetallic Hardness Rating:
4.9 shore durometer a
MRC:
The maximum load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.AASH
Min. Tensile Strength (psi):
Any acceptable
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
9.000 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
0.200 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
9.000 inches
MRC:
The condition of the item with respect to the texture of the surface.ADTX
Surface Condition:
Smooth both sides
MRC:
The element,compound,or mixture of which the strengthening feature is fabricated.ADZA
Strengthening Feature Material:
Ceramic particles
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Compression and heat resistant
MRC:
An integral feature of the item which strengthens and/or stiffens the basic material.ADZK
Strengthening Feature:
Internally molded-in reinforcement
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Tact aircrew combat training system; an/gsq-t103 c
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Flexible, elastic nature allows item to blanket highly uneven surfaces, drawing away and transfering heat from components such as microprocessors, video chips and power devices; thermal impedance: 2.86 degrees c-square inch/w at 10 psi (modified astm d5470); thermal conductivity: 1.6 w/m-k at 10 psi (modified astm d5470)
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
Gray, light both sides
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Silicone rubber
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber silicone class q
