부품 정보
Hook 0.313 to 0.323 in. Lg by 0.151 to 0.156 in. Radius by 0.300 in. W located at end of one end coil
TXT
묘사:
Compression Helical Spring
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
Between 2.500 inches and 2.530 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ABQK
End Style:
E4 spring end, squared and ground both ends
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ABQK
End Style:
Spring end, squared and ground both ends
MRC:
A measurement taken at right angles to the length of the stock,in distinction from thickness.ACVV
Stock Width:
0.306 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Recoil mechanism, 105-mm, m2a5
Spring Free Length:
Between 2.875 inches and 3.125 inches
MRC:
The number of coils included on the item.APCN
Coil Quantity:
4
MRC:
The rated load the item is designed to accommodate.ASZD
Load Rating:
Between 325.00 pounds and 375.00 pounds
Spring Solid Length:
1.250 inches
Spring Solid Outside Diameter:
3.612 inches
MRC:
An indication of the coil helix direction.AXLH
Coil Helix Direction:
Left-hand
MRC:
The weight,per specific measurement scale,required to deflect the spring.AXLP
Spring Deflection Rate:
228.000 pounds per inch
Spring Free Outside Diameter:
Between 3.112 inches and 3.142 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 6150 or steel comp 1095
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-624-canceled federal specification all material responses
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Oxide
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Cylindrical
