부품 정보
Fill markings with white paint
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Unable To Decode:
Unable to decode and unable to decode
MRC:
The number of setscrew holes included on the item.ABFR
Setscrew Hole Quantity:
2
MRC:
The distance from the center of the hole to the base of the knob or base of skirt if with integrally molded skirt.ABFU
Distance From Hole Center To Knob/skirt Base:
Between 0.180 inches and 0.200 inches
MRC:
An overall measurement between specified points of an item,in distinction from height.ABFY
Overall Depth:
Between 0.620 inches and 0.640 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the shaft accommodation.ABHH
Shaft Accommodation Style (non-core):
Err-090
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 2.490 inches and 2.510 inches
Knob Portion Diameter:
Between 0.860 inches and 0.880 inches
MRC:
The distance and type covered by the scale inscription range.ABWE
Scale Distance And Type:
Err-070
MRC:
The number of scale divisions.ABWG
Scale Division Quantity:
70 single scale
MRC:
Indicates the type of drive for turning,rotating,or positioning the mechanism.AKCV
Drive Type:
Direct
MRC:
Indicates the type of scale.ATEQ
Scale Type:
Linear single scale
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
32 screw hole
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.138 inches screw hole
MRC:
Indicates the type of mechanism used for positioning the item.CRRL
Positioning Mechanism Type:
Knob
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.850 inches and 0.870 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Round w/knob
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unc screw hole
