MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand or right-hand
MRC:
The ability of an item to withstand a specified torque load without fracture.AAPL
Torque Load Rating:
560.0 inch-pounds
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.AAUH
Spline Minor Diameter:
0.727 inches
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
Between 0.863 inches and 0.867 inches
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Flange
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
16
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.406 inches
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
6
MRC:
Designates the thread diameter and number of threads per specific measurement scale.ABUJ
Thread Size:
0.438-20 or 0.563-18
MRC:
The speed of the drive shaft required to produce the rated capacity of an item,expressed in revolutions per minute.AEQC
Operating Speed At Rated Capacity In Rpm:
8000.0
MRC:
The length of a straight line which passes through the center of a mounting bolt circle,and terminates at the circumference.AFFL
Mounting Bolt Circle Diameter:
5.000 inches
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
0.800 inches
MRC:
Indicates the type of drive shaft by the physical configuration,condition,and the like of the shaft end.AJAB
Drive Shaft Type:
Splined, involute external
MRC:
The element,compound,or mixture of which the housing is fabricated.AJLF
Housing Material:
Aluminum
MRC:
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.AJYP
Screw Thread Series Designator:
Unf or unf
MRC:
The direction of rotation of a rotating shaft as viewed from the drive end.AKCT
Shaft Rotation Direction:
Counterclockwise
MRC:
Indicates the location of the thread on the item.APJC
Thread Location:
Internal or internal
MRC:
A measurement of the longest dimension the shaft extends from the item.ARQA
Shaft Protrusion Length:
1.543 inches
MRC:
A measurement of the spline pitch of the item.ASAP
Spline Pitch:
20/30
MRC:
The number of connections furnished.ASMM
Connection Quantity:
1 or 1
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Drain and drain
MRC:
The design of the connection.AXFC
Connection Design:
Threaded or threaded
MRC:
The pressure angle of the spline,expressed in degrees.AXFG
Spline Pressure Angle In Deg:
30.0
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
1.000 inches
MRC:
The government standard that covers the drive shaft.AXFM
Drive Shaft Government Standard:
And10262 type 12j
MRC:
The government standard that covers the mounting.AXFN
Mounting Government Standard:
And 10262 type 12j
MRC:
Indicates the displacement type.AXFP
Displacement Type:
Constant
MRC:
An indication of the constant displacement per revolution.AXFQ
Constant Displacement Per Revolution:
0.950 cubic inches
MRC:
The government specification and/or standard that specifically covers the connection.AZFE
Connection Government Specification/std:
And10050-4 and and10050-6
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off.AZFH
Housing Surface Treatment:
Anodized
