TXT
묘사:
Electrical Headset
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Headset, covered
MRC:
The number of terminals for providing electrical connection to the item.AARA
Terminal Quantity:
2
MRC:
Indicates the type of terminals for providing electrical connection to the item.AARB
Terminal Type:
Tab, solder lug
MRC:
The total opposition /resistive and reactive/ which the item offers to the flow of an alternating current,expressed in ohms.ACYW
Impedance Rating In Ohms:
600.0
MRC:
Indicates the location of the terminal(s) for making connection to an item.AEEG
Terminal Location:
Internal
MRC:
The element,compound,or mixture of which the headband is fabricated.AFAH
Headband Material:
Any acceptable
MRC:
The minimum and maximum frequencies to which the item will respond,expressed in hertz.AFYW
Frequency Response Range In Hertz:
+40.0/+15000.0
MRC:
The rating indicating the ratio of the output voltage or power to the input voltage or power at a specified reference energy level,expressed in decibels.AFZA
Output Sensitivity Rating In Decibels:
103.0
MRC:
Indicates the type of physical feature which mechanically connects and positions earphone(s) or other sound conductors over or adjacent to the ear(s) of the wearer.AHEJ
Headband Type:
Any acceptable
MRC:
The element,compound,or mixture of which the headband covering is fabricated.AHEK
Headband Covering Material:
Any acceptable
MRC:
The element,compound,or mixture of which the headband padding is fabricated.AHEL
Headband Padding Material:
Any acceptable
MRC:
A measurement of the longest dimension of the headset cord,in distinction from width.AHEM
Headset Cord Length:
24.0 inches
MRC:
The means provided to mount or otherwise accommodate a microphone.AHEN
Microphone Mounting Facility:
Any acceptable
MRC:
Indicates the type of helmet accommodated by the item.AHEP
Accommodated Helmet Type:
Flight
MRC:
Indicates the type of earphone element as determined by its construction and method of operation.AHEQ
Earphone Element Type:
Dynamic
MRC:
The designed ability of the item to monitor channels.AHER
Channel Monitor Capability:
Any acceptable
MRC:
The number of earphones provided on the item.AHES
Earphone Quantity:
2
MRC:
The element,compound,or mixture of which the earphone cap is fabricated,excluding any surface treatment.AHEU
Earphone Cap Material:
Any acceptable
MRC:
The element,compound,or mixture of which the earphone shell is fabricated,excluding any surface treatment.AHEV
Earphone Shell Material:
Any acceptable
MRC:
The element,compound,or mixture of which the earphone cushion is fabricated,excluding any surface treatment.AHEW
Earphone Cushion Material:
Any acceptable
MRC:
The designation that identifies the electrical circuit arrangement through which an incoming signal is conducted to the earphone/s/.AHEX
Earphone Interconnection Arrangement:
Single
MRC:
The means of attaching the earphone to the item.AHEY
Earphone Mounting Method:
Screw plate on case back
Headsetheight:
2.813 inches
Headsetwidth:
5.062 inches
Headsetdepth:
2.250 inches
MRC:
Indicates the type of device used to match the impedance of the item to the impedance of the output circuit.AHFP
Impedance Matching Device Type:
Solid state
MRC:
The electrical input power and sound pressure output ratings which are used as a base reference for the measurement of the sensitivity of an item.AHFS
Acoustic Sensitivity Reference Rating:
Not rated
MRC:
An indication of whether or not a magnetic shield is included.AHFT
Magnetic Shielding:
Not included
MRC:
Indicates the location of the input connection headset with respect to the wearer.AHFU
Headset Connecting Cord Termination Location:
Reversible right-left
MRC:
Indicates the type of terminals for providing electrical connection to the signal input.AHFZ
Signal Input Terminal Type:
Jack
