부품 정보
Longitudinal hole 0.187 inch diameter 3.300 inch depth, with 0.250-28 unified national fine 2b internal full thread 0.190 inch long, located on axial center opposite slotted end; chamfer 0.040 inch long 45.0 degree on both ends; singular slot 0.290 inch wide 0.400 inch deep, parallel to and 0.260 inch distance from pin slotted end
TXT
묘사:
Headless Straight Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Slotted
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Square internally threaded
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
One end drilled
First Hole Diameter:
0.187 inches
Distance From Centerline Of Hole To End Of Pin:
3.210 inches
MRC:
The overall dimension measured along the longitudinal axis,with terminated points at the extreme ends of the pin.ACHT
Pinlength:
6.000 inches
MRC:
The overall length of a straight line which passes through the center of the pin,and terminates at the outside circumference.ACHU
Pindiameter:
Between 2.4940 inches and 2.4950 inches
First End Slot Width:
0.120 inches
First End Slot Depth:
0.120 inches
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Not identical
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
50.0 rockwell c and 55.0 rockwell c
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches outside diameter
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 440b or steel comp 440c
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-763, condition a federal specification all material responses
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-35, type iv federal specification single treatment response