MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
4.188 inches
MRC:
The angle of the conical recess of the hole,expressed in degrees.ABQS
Countersunk Hole Angle In Deg:
45.0
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
Between 0.765 inches and 0.775 inches
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
6
MRC:
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.ADGA
Overall Outside Diameter:
Between 16.031 inches and 16.094 inches
MRC:
The length of a straight line which passes through the center of the center hole,and terminates at the circumference.ADYT
Center Hole Diameter:
Between 6.162 inches and 6.166 inches
MRC:
The number of holes provided for aligning the item.AJVW
Alignment Hole Quantity:
3
MRC:
The spacing between the mounting holes.ALXY
Mounting Hole Spacing:
Equally spaced on 8.750 in. Bolt circle
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Iron, qq-i-652, class 30-canceled wear surface err-100 err-100
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Steel, qq-s-00640, comp fs1009-canceled mounting disk err-100 err-100
MRC:
Indicates the braking surface location on the item.AYPQ
Braking Surface Location:
Internal
MRC:
The length of a straight line which passes through the center of the braking surface,and terminates at the circumference.AYQA
Braking Surface Diameter:
13.969 inches
MRC:
The measurement taken at right angles to the length of the braking surface,in distinction from thickness.AYQB
Braking Surface Width:
2.750 inches
MRC:
Designates the size of the hole(s) of the item.AYQC
Hole Size:
0.468 in. Dia
MRC:
The spacing between the holes.AYQE
Hole Spacing:
Equally spaced between mtg holes on 8.750 in. Bolt circle
MRC:
An indication of whether or not a cooling fin/s/ is included.AYQF
Cooling Fin:
Included
MRC:
An indication of whether or not an adjustment hole is included.AYQH
Adjustment Hole:
Not included
MRC:
An indication of whether or not an inspection hole is included.AYQJ
Inspection Hole:
Not included
MRC:
An indication of whether or not an oil drain hole is included.AYQK
Oil Drain Hole:
Not included
MRC:
An indication of whether or not a balancing pad(s) is included.AYQL
Balancing Pad:
Not included
