부품 정보
Special application; end item is landing craft air cushion
TXT
묘사:
Dynamic Microphone
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Hand held
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
2.250 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
3.562 inches
MRC:
The means of attaching the item.ADJH
Mounting Method:
Clip
MRC:
Indicates the type of switch included in the item.AEEA
Switch Type:
Push
MRC:
The identifying numeric code of the originator that controls or manufactures the electrical connector receptacle.AEEE
Connector Manufacturer Code:
81349
MRC:
The additional parts supplied with the item which may be required for application.AFHR
Accessory Components:
Connector
MRC:
The minimum and maximum frequencies to which the item will respond,expressed in hertz.AFYW
Frequency Response Range In Hertz:
+300.0/+3000.0
MRC:
The means used to select the output impedance of the item.AFYX
Impedance Selection Method:
Integral switch
MRC:
The total opposition /resistive and reactive/ to the flow of alternating current.AFYY
Impedance Rating:
100.0 ohms
MRC:
The rating indicating the ratio of the output voltage or power to the input voltage or power at a specified reference energy level,expressed in decibels.AFZA
Output Sensitivity Rating In Decibels:
-2.5 and 2.5
MRC:
The electrical output rating and sound pressure input rating which are used as a base reference for the measurement of the sensitivity of an item.AFZB
Output Sensitivity Rating Reference:
0.0002 dynes per sq centimeter
MRC:
An indication of whether or not the item requires a specific polarity for connection into the operating circuit.AGAX
Polarity Connection:
Required
MRC:
Indicates the specific type of sound pickup which determines the performance of the item.AGAY
Sound Pickup Directional Type:
Unidirectional
MRC:
An indication of whether or not a feature is included to enable the item to cancel undesirable background sounds.AGAZ
Noise Canceling Feature:
Not included
MRC:
An indication of whether or not a support stand is included with the item.AGBA
Support Stand:
Not included
MRC:
An indication of whether or not the item is provided with a self-contained shock mount.AGBC
Shock Mount:
Not provided
MRC:
Indicates the type of electrical connection included on the item.AGBD
Electrical Connection Type:
Integral cable
MRC:
The specification,standard,or manufacturer's number or symbol used to identify the connector.AGBG
Connector Identification:
Pj068
MRC:
A measurement of the longest dimension of a cable or cord when fully extended.AGBJ
Extended Cable Length:
5.0 feet
MRC:
A measurement of the longest dimension of a cable or cord when retracted or in normal unextended condition.AGBK
Retracted Cable Length:
1.1 feet
MRC:
The number of conductors,shielded and unshielded,which make up the cable.AGBL
Cable Conductor Quantity:
3
MRC:
The value of direct current required to maintain the rated performance of an item.AGVE
Operating Dc:
35.0 milliamperes
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Feat
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
1.562 inches
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
81349-mil-m-21393a specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
81349-mil-m-21393 government specification
