부품 정보
Item name: motor, condenser
TXT
묘사:
Alternating Current Motor
MRC:
The distance measured in a straight line from the bottom to the top of an item.AAJT
Overall Height:
6.375 inches
MRC:
A measurement of the longest dimension of an item,in distinction from width.AAJU
Overall Length:
11.440 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.AAJV
Overall Width:
6.375 inches
MRC:
A measurement taken at right angles to the length of a keyway,in distinction from thickness.ABRR
Keyway Width:
0.188 inches single end and 0.190 inches single end
MRC:
A measurement from the top surface to the bottom of the keyway groove.ABRV
Keyway Depth:
0.092 inches single end and 0.094 inches single end
MRC:
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.ABWV
Shaft Diameter:
0.625 inches single end
MRC:
A measurement of the longest dimension of a keyway,in distinction from width.AFYS
Keyway Length:
1.540 inches single end
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Force provider (used on: 4120-01-413-7835)
MRC:
The direction of rotation of a rotating shaft as viewed from the drive end.AKCT
Shaft Rotation Direction:
Counterclockwise single end
MRC:
The working period under which the item was designed to operate.AKPS
Duty Cycle:
Continuous
MRC:
An indication of the feature/s/ of the inclosure.ANPZ
Inclosure Feature:
Fungus proof and weatherproof
MRC:
The means of attaching the item.AXGY
Mounting Method:
Bed plate
MRC:
Indicates the type and number of facilities by which the item is mounted.AXHR
Mounting Facility Type And Quantity:
1 clamp collar
MRC:
A measurement of the longest dimension of the shaft projection of an item,in distinction from width.CWCS
Length Of Shaft From Housing:
1.750 inches single end
MRC:
The distance between the center of the shaft to the mounting surface.CWDM
Shaft Center To Mounting Surface Distance:
3.188 inches single end
MRC:
An indication of the characteristic(s) of the shaft end.CWHZ
Shaft End Characteristic:
A9 single style single end
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
The motors shall be designed and tested iaw: national electric manufacturers associatio (nema) publication no. Mg1 and other requirements as specified on this drawing // the motor shall have 3 wires, phase a, b & c, 108"+-1, 12 awg, with terminal lugs, ms25036-156 and 2 wires, p1 & p2, 96"+-1, 18 awg, with terminal lugs, ms25036-101 // specifications: a. Voltage(208/230 volt +10% -5%) x b. Frequency(50/60 hz +-5%) x c. Phase(3) x d. Weight(27 lbs max) x e. Horsepower & speed(0.75 brake horsepower at 1140 rpm, continuous rating) x f. Efficiency(70% min at 0.6 bhp) x g. Air flow over motor(1, 000 fpm min)
MRC:
Indicates the type and number of terminals for providing electrical connection.TTQY
Terminal Type And Quantity:
5 wire lead and 5 solderless lug
