MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Plain, solid
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
3.6660 inches
MRC:
The number of teeth included on the item.AJLA
Teeth Quantity:
44
MRC:
The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.CWCD
Outside Diameter:
3.713 inches
MRC:
The nominal dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.CWFR
Nominallength:
1.500 inches
MRC:
Indicates the type of teeth included on the item.CWMW
Teeth Type:
Straight
MRC:
The measurement of the pressure angle on the item.CWPP
Pressure Angle:
14.50000 degrees and 63.4333 degrees
MRC:
The nominal distance between the body face and the protruding hub end.CWQL
Distance Between Body Face And Protruding Hub End:
0.156 inches first end
MRC:
The nominal distance between the body face and the protruding hub end.CWQL
Distance Between Body Face And Protruding Hub End:
0.851 inches second end
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.CWRM
Face Width:
0.500 inches
MRC:
The nominal length of a straight line which passes through the center of a bore,and terminates at the circumference.CWRS
Bore Diameter:
0.875 inches both ends
MRC:
A nominal measurement between specified points on the bore,in distinction from height.CWRX
Bore Depth:
1.500 inches both ends
MRC:
A nominal measurement taken at right angles to the length of a keyway,in distinction from thickness.CWSN
Keyway Width:
0.249 inches both ends
MRC:
The nominal distance from the center of the bore to the bottom of the keyway(s).CWSR
Distance From Bore Center To Keyway Bottom:
0.5250 inches both ends
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the hub.CWTR
Hub Style Designator:
Plain both ends
MRC:
The nominal length of a straight line which passes through the center of a hub,and terminates at the circumference.CWTX
Hub Diameter:
1.375 inches first end
MRC:
The nominal length of a straight line which passes through the center of a hub,and terminates at the circumference.CWTX
Hub Diameter:
1.625 inches second end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4140
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
66 federal standard single material response and aisi/sae 4140 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Peripheral face, protruding hubs
