TXT
묘사:
Headed Grooved Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Counterbored w/thru hole
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat countersunk (included angle less than 135 deg)
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.251 inches and 0.253 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
0.887 inches
Undercut Diameter:
0.187 inches
Under Head Length:
1.875 inches
Undercut Width:
0.100 inches
First End Counterbore Diameter:
Between 0.177 inches and 0.187 inches
First End Counterbore Depth:
0.270 inches
Pin Head Diameter:
Between 0.380 inches and 0.390 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches
MRC:
The included angle of the head countersink.CTPW
Head Countersink Angle:
60.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 410
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5613 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove
