TXT
묘사:
Headed Straight Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Pan no. 2 (r1 not required in item description)
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.371 inches and 0.373 inches
Under Head Length:
Between 1.089 inches and 1.099 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Systems scope control
Pin Chamfer Angle:
15.0 degrees
Pin Head Diameter:
0.500 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Item is internally threaded 0.125 diameter x .75 inches deep; 1/4-28unf-2b-taper thread; item has been altered from ms20392-5c27; make from ms20392-5c27; ground handling gear assembly
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
0.063 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4037 or steel comp 4130 or steel comp 8630 or steel comp 8740
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams6300 assn standard single material response or mil-s-6758 military specification single material response or mil-s-6050 military specification single material response or mil-s-6758 military specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-416, type 2, class2 federal specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Straight
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Item has 3 holes 0.091 inches drilled along the logitudal axis of the pin for lubrication; first hole is 0.182 inches from top of head; second hole is 0.442 inches from top of head; third hole is 0.702 inches from top of head
