부품 정보
Shaft-apu inlet door
TXT
묘사:
Rotating Shaft Eye Bracket
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
1.375 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
8.102 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
3.938 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
F-22 raptor
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the inside circumference.BCXD
Bore Inside Diameter:
0.500 inches
MRC:
Indicates the type and number of mounting holes provided on the item.CTQY
Mounting Hole Type And Quantity:
1 plain and 1 threaded
MRC:
The nominal length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.CWZK
Mounting Hole Diameter:
0.500 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
7 shouldered shaft; 32 in. Micro finnish; 1.250 in. Diameter involete spline; 90 degrees dual prong bracket arm 1.187 in. Lg; first prong arm 0.255 in. Thk with protruding 0.563 in. Diameter dimple, second prong arm 0.250 in. Thk
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams5629 assn standard single material response
MRC:
Designates the thread diameter,series/type,and number of threads per specific measurement scale.THDS
Thread Size And Series/type Designator:
1/2-20 unf
