부품 번호 596-7409351-27

Nonmetallic Angle

가격 및 가용성

이 NSN의 현재 가격 및 가용성에 대해 이 양식을 제출하십시오.
부품 번호:
양:
이메일 주소:
전화:
참조:
회사:
이름:

우리는 귀하의 정보를 누구에게도 공유하거나 판매하지 않습니다.
사생활 | 용어

All major credit cards accepted as well as gov. p-cards

이 제품의 과거 가격은 20.78 and 28.053 USD. 수량, 가용성, 상태, 리드 타임 및 품목 중단 가능성에 따라 최신 견적을 제공할 때까지 가격을 보장할 수 없습니다.

부품 번호
비무장화
수명
UOM
NIIN
부품 번호:
596-7409351-27
비무장화:
No
수명:
N/A
측정 단위:
1 EA
NIIN:
014984820

부품 정보
Drawing calls this: shim, center rail, slide; upper/longer leg has two holes, 0.281 through countersunk 0.560 x 82 degrees, centered 1.031 inch from top and 1.000 from each end; horizontal leg has three holes, 0.281 thru, cs 0.560 x 82 deg, centered 0.437 from l bend, spaced 3.000, 9.500, and 16.000 from left edge, and two pilot holes. 0.190 thru, centered on same lengthwise line, spaced 2.000 inches from each end

NSN
국가 주식 번호:
9390-01-498-4820 9390014984820
TXT
묘사:
Nonmetallic Angle
INC
INC
아이템 이름 코드:
30217
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Angle
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Nonmetallic Hardness Rating:
94.0 rockwell m
MRC:
The maximum load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.AASH
Min. Tensile Strength (psi):
10 kilograms per square centimeter
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
257.0 degrees fahrenheit
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
2.092 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
0.781 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
19.000 inches
MRC:
None.ADXL
Left Side Flange Thickness:
0.188 inches
MRC:
None.ADXZ
Left Inside Angle In Deg:
90.0
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Weather resistant
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Seawolf class ssn; plunger assembly
MRC:
None.AJGP
Base Flange Thickness:
0.218 inches
MRC:
The style designation corresponding to the shape of the left-side flange tip.BHQU
Left-side Flange Tip Style:
Left square end
MRC:
The style designation corresponding to the shape of the base flange tip.BHQV
Base Flange Tip Style:
Base square end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic, acetal-delrin composition 100 af

{lang[cimilar]} Nonmetallic Angles

« Miscellaneous Fabricated Nonmetallic Materials {lang[catalog]}
지금 비교»
맑다 | 숨기다