MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Circular grooved flat keyway and externally threaded
First End Groove Width:
Between 0.1250 inches and 0.1410 inches
First End Groove Diameter:
Between 1.4770 inches and 1.4790 inches
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Two flat keyways
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
26.500 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Nimitz class (cvn)
First End Distance From End To Groove:
Between 0.5940 inches and 0.5990 inches
MRC:
A measurement taken at right angles to the length of the keyway at the first end,in distinction from thickness.AMCZ
First End Keyway Width:
Between 0.3120 inches and 0.3280 inches
First End External Keyway Length:
Between 0.8500 inches and 0.8700 inches
MRC:
A measurement between specified points of the keyway at the first end.AMDG
First End Keyway Depth:
Between 0.1560 inches and 0.1640 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 1.5548 inches and 1.5830 inches
First End External Thread Length:
Between 0.5940 inches and 0.5990 inches
MRC:
A measurement taken at right angles to the length of the keyway at the second end,in distinction from thickness.AMFR
Second End Keyway Width:
Between 0.4380 inches and 0.4400 inches
Second End External Keyway Length:
2.7500 inches
MRC:
A measurement between specified points of the keyway at the second end.AMFT
Second End Keyway Depth:
Between 0.2190 inches and 0.2200 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 1.7490 inches and 1.7500 inches
Second End Angle Between Keyways:
Between 89.9 degrees and 90.0 degrees
MRC:
The number of steps provided.ATPC
Step Quantity:
5
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
Between 2.4970 inches and 2.5030 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
10.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
