부품 정보
Cadmium plate by vacuum process 0.0002 in. Min, 0.0003 in. Maximum thk
TXT
묘사:
Headed Grooved Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat chamfer
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.358 inches and 0.359 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
Between 0.490 inches and 0.493 inches
Undercut Diameter:
Between 0.323 inches and 0.332 inches
Under Head Length:
Between 0.545 inches and 0.556 inches
Undercut Width:
Between 0.028 inches and 0.031 inches
First End Taper Length:
0.015 inches
First End Taper Angle:
45.0 degrees
Pin Head Diameter:
0.500 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches outside diameter
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.052 inches and 0.057 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4130
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove
