부품 정보
Face of left external flange is counter sunk 2.0700 in. Diameter by 0.0700 in. Deep; counter sunk portion of flange has 5 0.2830 in. Diameter holes unevenly spaced; outer portion of flange has 4 0.2180 in. Diameter holes unevenly spaced and 3 0.1920 in. Diameter holes with 0.3450 in. By 99 degrees csk (farside)
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.2470 inches first and 0.2560 inches first
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 2.2100 inches and 2.2300 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
Between 1.3745 inches and 1.3748 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
Between 1.2602 inches and 1.2605 inches
MRC:
The length of a straight line which passes through the center of the flange,and terminates at the outside circumference.AEPR
Flange Outside Diameter:
Between 2.6640 inches and 2.6650 inches
MRC:
A measurement taken at right angles to the length of a flange,in distinction from thickness.AGFF
Flange Width:
Between 0.1250 inches and 0.1260 inches
Interior Flange Hole Diameter:
Between 1.0900 inches and 1.0905 inches
Interior Flange Left End To Centerline Distance:
Between 1.5200 inches and 1.5310 inches
Interior Flange Width:
Between 0.4910 inches and 0.4920 inches
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square all corners
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Casehardened
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches
MRC:
Indicates the type and number of features used for the introduction of a lubricant or an antirotational device.CTJM
Antirotation/lubrication Type And Quantity:
1 hole
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
22c-2 solid, external flange one end, interior flang (s) not located at either end
