MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Circular grooved and externally threaded
First End Groove Width:
0.3800 inches
First End Groove Diameter:
0.8000 inches
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Circular grooved flat keyway and externally threaded
Second End Groove Width:
0.3800 inches
Second End Groove Diameter:
0.8000 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
33.190 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Anchor & anchor chain securing mechanism assembly; w/s: los agenles class ssn (688)
First End Distance From End To Groove:
Between 1.170 inches and 1.175 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 1.4910 inches and 1.4930 inches
First End External Thread Length:
Between 1.170 inches and 1.175 inches
Second End Distance From End To Groove:
1.120 inches
MRC:
A measurement taken at right angles to the length of the keyway at the second end,in distinction from thickness.AMFR
Second End Keyway Width:
Between 0.3750 inches and 0.3770 inches
Second End External Keyway Length:
Between 2.625 inches and 2.637 inches
MRC:
A measurement between specified points of the keyway at the second end.AMFT
Second End Keyway Depth:
Between 0.185 inches and 0.203 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 1.4910 inches and 1.4930 inches
Second End External Thread Length:
1.120 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
11
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
1.750 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
BOTH-EN-DSO-FSHA
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-n-286, form: 2, condition: annealed&agehardened, hotfinis federal specification single material response
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
81348-qq-n-286, form: 2, condition: annealed and age hardened, finish: hot finish government specification
