Slot Width:
0.026 inches single end
MRC:
A measurement of the longest dimension of the terminal,in distinction from width.AAEY
Terminal Length:
0.062 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.AAJT
Overall Height:
0.156 inches
MRC:
A measurement of the longest straight line across a circular cross-sectional plane.AAJW
Overall Diameter:
0.072 inches
Thru-hole Diameter:
0.026 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the largest circumference.AALA
Largest Diameter:
0.047 inches single end
MRC:
The style designation indicating the configuration that most nearly corresponds to the mounting method of the item.AALX
Mounting Method Style:
Open slot
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.AAMA
Mounting Hole Diameter:
0.025 inches
Mounting Tongue Width:
0.072 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the basic appearance of the item.AGTA
Basic Shape Style:
Nontubular, round
MRC:
Indicates the type of connector or conductor accommodation included on the item.CSFJ
Conductor Accommodation Type:
Slotted single turret single end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy conductor accommodation
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm-b-140, alloy b assn standard single material response conductor accommodation
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Gold conductor accommodation single layer
MRC:
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.SPCL
Special Test Features:
Terminals shall be anneal after machining as follows heat to 500 degrees and hold 30 mins. Heat to 1000 degrees and hold for one hour. Air cool
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-g-45204, type ii, class i with copper strike military specification single treatment response conductor accommodation single layer
