부품 정보
Collar, cylinder rod
MRC:
The measurement of the chamfer angle,expressed in degrees.AATE
Chamfer Angle In Deg:
45.0
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
5.875 inches
MRC:
The measurement from one flat surface of the key to the opposite flat surface.ABLJ
Internal Straight Key Width:
0.600 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
3.188 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
3.5000 inches
Largest Diameter Length:
2.808 inches
MRC:
The number of keys contained in or on the item.AEVC
Key Quantity:
4
MRC:
The distance from the center of the bore to the top of the key/s/.AEVD
Distance From Center Of Bore To Top Of Key:
2.7675 inches
MRC:
A measurement of the amount of turning necessary to bring one key into coincidence with another,expressed in degrees.AEVG
Err Default:
Err default
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Retractable bow plane stock and bearing carrier assembly for los angeles class ssn (688)
MRC:
Designates the specific roughness rating representing the arithmetic average deviation of the surface from the meanline in profile,and its location on the item.CSFN
Surface Finish And Location:
16 microinches inside periphery
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
2four securing grooves on perimeter are tapered; inside hole diameter tapers from 3.500 inch diameter to 2.620 inch diameter with included angle of 16.59 degrees; material standard cage 81348 qq-n-286 form 2 condition annealed and age hardened, finish a
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Nickel copper aluminum alloy, qq-n-286, class a
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel alloy k-500
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-n-286, class a federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Round w/double chamfer
