부품 정보
Original dwg name-cover, box plate inseparable assembly
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Flat
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.375 inches and 0.378 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
7.500 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, four holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
8.560 inches
Distance Between Holes Along Length:
5.750 inches
Distance Between Holes Along Width:
4.000 inches
Distance From First Hole Centerline To End Along Length:
0.560 inches
Distance From First Hole Centerline To End Along Width:
1.810 inches
MRC:
The length of a linear break at an angle to the surfaces forming the edge.ADPE
Corner Bevel Length:
1.190 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Threaded fastener
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Unthreaded hole
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
3item is part of an inseparable assembly c/o 4 flush-mounted retainers, 4 panel screw fasteners and 1 caution label; item also has beveled edges @ other end and 1/2 circle w/2.50 radius w/ distance from edge to cneter of 1/2 circle of 3.750 in.
