부품 정보
Undercut 0.500 diameter by 1.360 lg; threaded end relieved to 0.433 in. Min 0.435 in. Maximum diameter by 0.690 in. Lg w/threaded tip 0.2500-28 unf-2a right hand thd 0.400 in. Lg; connector end and threaded stud dry film lubricated, mil-l-46010; 0.812 in. Diameter segment only painted white epoxy-polyamide, mil-p-24441/3
TXT
묘사:
Rod End Connector
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2a rod connection
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Left-hand rod connection
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
5.800 inches rod connection
MRC:
The length of a straight line which passes through the center of the shank,and terminates at the outside circumference.AGGZ
Shank Outside Diameter:
0.812 inches
MRC:
A measurement taken at right angles to the length of a tongue,in distinction from thickness.AHHE
Tongue Width:
Between 0.229 inches and 0.239 inches
MRC:
A measurement of the smallest dimension of a tongue,in distinction from length or width.AHHF
Tongue Thickness:
0.812 inches
Distance From Pivot Pinhole Center To Tongue End:
0.475 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the shank.ATCG
Shanklength:
7.160 inches
MRC:
The distance from the end of the item to the center of the hole.BFKT
Distance From End To Hole Center:
11.625 inches
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.500 inches rod connection
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4140
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-5626, cond d1 military specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Connector
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unf rod connection
