TXT
묘사:
Waveguide Assembly
MRC:
The angular measurement by which one part/section of a rigid item deviates from a straight line projection of an adjacent part/section,expressed in degrees.ACJL
Bend Angle In Deg:
62.0 single bend h-plane
MRC:
The number of flanges provided with the item.AHSF
Flange Quantity:
2
Flange Inside Width:
2.005 inches all flanges and 2.010 inches all flanges
Flange Inside Height:
1.005 inches all flanges and 1.010 inches all flanges
Flange Outside Width:
3.480 inches all flanges and 3.520 inches all flanges
Flange Outside Height:
2.480 inches all flanges and 2.520 inches all flanges
MRC:
The length of a straight line which passes through the center of a flange connecting hole,and terminates at the circumference.AHTN
Flange Connecting Hole Diameter:
0.256 inches all flanges all connection facilities and 0.262 inches all flanges all connection facilities
MRC:
The ratio of the maximum to the minimum amplitude of pressure /voltage/ measured along the path of the waves.AHTW
Voltage Standing Wave Ratio:
1.10
MRC:
The type and number of facilities by which the flange is connected.CSQT
Flange Connecting Facility And Quantity:
8 unthreaded hole all flanges all connection facilities
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the flange.CTCJ
Flange Style:
Contact type all flanges
Waveguide Length:
13.572 inches
Waveguide Center To Center Distance:
17.817 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Offset bend type
