부품 정보
Gasket has two apertures, each aperture has four 0.120 in. Inside corner radii. Both apertures are 11.360 in. Long, one aperture is 1.320 in. Wide and the other aperture is 2.640 in. Wide
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Solid single or composition
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.188 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
12.120 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
4.960 inches
Outside Edge To Bolt Hole Center Distance Along Width:
0.160 inches
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
0.062 inches
Outside Edge To Inside Edge Smallest Distance Along Width:
0.380 inches
Outside Edge To Inside Edge Smallest Distance Along Length:
0.250 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber silicone class q
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Zz-r-765 cl 3b, grade 30 federal specification single material response
