부품 번호 5508018

Sleeve Nut
재고 가용성  제품 상태 코드

부품 번호 5508018 다음과 같은 수량과 조건으로 재고가 있습니다.

  • NE: 1

참고: 이 항목의 가용성은 마지막으로 업데이트되었습니다. 01/08/2023 그 이후로 변경되었을 수 있습니다. 최신 가격 및 가용성에 대한 견적을 요청하십시오.

가격 및 가용성

이 NSN의 현재 가격 및 가용성에 대해 이 양식을 제출하십시오.
부품 번호:
양:
이메일 주소:
전화:
참조:
회사:
이름:

우리는 귀하의 정보를 누구에게도 공유하거나 판매하지 않습니다.
사생활 | 용어

All major credit cards accepted as well as gov. p-cards

이 제품의 과거 가격은 766.5 and 1034.775 USD. 수량, 가용성, 상태, 리드 타임 및 품목 중단 가능성에 따라 최신 견적을 제공할 때까지 가격을 보장할 수 없습니다.

부품 번호
비무장화
수명
UOM
NIIN
부품 번호:
5508018
비무장화:
No
수명:
N/A
측정 단위:
1 EA
NIIN:
005508018
NSN
국가 주식 번호:
5310-00-550-8018 5310005508018
TXT
묘사:
Sleeve Nut
INC
INC
아이템 이름 코드:
29735
MRC:
The minimum and maximum pitch diameter limits of a straight screw thread.AAJE
Thread Pitch Diameters:
+2.2000/+2.2400 inches
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
The length of a straight line which passes through the center of a flange,and terminates at the circumference.ABKK
Flange Diameter:
Between 3.540 inches and 3.550 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
Between 0.115 inches and 0.125 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.ACTA
Nut Style:
Sleeve
MRC:
None.ACTD
Nut Diameter:
Between 3.057 inches and 3.060 inches
MRC:
A measurement of the longest dimension of the nut,in distinction from width.ACVN
Nut Length:
Between 1.552 inches and 1.562 inches
MRC:
The length of a straight line which passes through the center of a drilled hole,and terminates at the circumference.AGGP
Drilled Hole Diameter:
0.203 inches
MRC:
Indicates the type and number of holes provided.ALET
Hole Type And Quantity:
2 drilled
MRC:
The geometric configuration of the item when viewed in cross section.ANLR
Cross-sectional Shape:
Round boss
MRC:
The geometric configuration of the item when viewed in cross section.ANLR
Cross-sectional Shape:
Round flange
MRC:
The geometric configuration of the item when viewed in cross section.ANLR
Cross-sectional Shape:
Round nut
MRC:
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.BZRR
Thread Series:
Uns
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
3
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
Between 18.0 rockwell c and 30.0 rockwell c
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
2.375 inches
MRC:
The style designation that most nearly corresponds to the appearance of the hole configuration.CRHC
Hole Configuration Style:
Configuration f
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Actd
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp e3310 or steel comp 9310
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Phosphate and zinc

{lang[cimilar]} Sleeve Nuts

« Nuts and Washers {lang[catalog]}
지금 비교»
맑다 | 숨기다