부품 정보
Right end surface of bore countersunk 0.1250 in. Deep, 1.4160 in. Nom dia; 32.0 microinch finish inside surfaces of internal flanges
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
5.7500 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
Between 1.6190 inches and 1.6270 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
1.3438 inches
Left Internal Flange Hole Diameter:
Between 1.3120 inches and 1.3130 inches
Right Internal Flange Hole Diameter:
Between 1.3120 inches and 1.3130 inches
Left Internal Flange Width:
1.5000 inches
Right Internal Flange Width:
1.5000 inches
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Chamfered inside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square inside right corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square outside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square outside right corner
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches outside diameter surface of body
MRC:
The measured distances which are characteristic of the keyway.CTNG
Keyway Dimension:
0.3125 inches internal keyway width and 0.3438 inches internal keyway width
MRC:
The measured distances which are characteristic of the keyway.CTNG
Keyway Dimension:
0.4688 inches internal keyway length
MRC:
The measured distances which are characteristic of the keyway.CTNG
Keyway Dimension:
0.1094 inches internal keyway depth and 0.1250 inches internal keyway depth
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel alloy k-500
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-n-286 federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
17c-3 solid, plain, no outside flanges, internal flange at both ends
