MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2a both ends
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2b first end
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.875 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
0.515 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
1.375 inches
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
0.500 inches
MRC:
A measurement from the top to the bottom of the bevel on the first end.ADGP
First End Chamfer Depth:
0.203 inches
Thread Relief Length:
Between 0.107 inches and 0.122 inches
First Packing Chamber Inside Diameter:
Between 0.9098 inches and 0.9188 inches
First Packing Chamber Length:
1.172 inches
Distance From Outside Edge Of First Packing Chamber To Edge Of Mounting Flange:
1.375 inches
MRC:
The number of packing chambers contained in the item.ADJG
Packing Chamber Quantity:
1
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
1.250 inches
MRC:
The means of attaching the item.AXGY
Mounting Method:
Thread
MRC:
Designates the size of the item.BGBD
Size:
0.515 inches
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Adhm
Second End Chamfer Angle:
45.0 degrees
MRC:
Markings included on an item for the purpose of offering instructions or warnings or to indicate the purpose,function,or application of the item.excludes manufacturers part numbers,symbols,or the like.MARK
Special Markings:
B
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Plain-single-shallow
