TXT
묘사:
Machine Thread Bushing
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
The included angle of the countersink,expressed in degrees.AATA
Countersink Angle In Deg:
45.0
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 0.640 inches and 0.660 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
Between 0.120 inches and 0.140 inches
MRC:
The measurement of the process used to enlarge part of a hole,in distinction from height.ADBD
Countersink Depth:
Between 0.025 inches and 0.040 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
C-17a aircraft
MRC:
A measurement of the extent of screw threads,including incomplete screw threads,along a line parallel to the longitudinal thread axis.AJYR
Screw Thread Length:
0.370 inches
MRC:
The shortest straight line between flats,perpendicular to the height.ASDB
Width Across Flats:
Between 0.970 inches and 1.030 inches
MRC:
Indicates the location of the countersink on the item.BQDD
Countersink Location:
Threaded end and wrenching end
MRC:
The length of a straight line which passes through the center of the hole,and terminates at the inside circumference.BXBR
Hole Inside Diameter:
Between 0.765 inches and 0.785 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
18
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
1.063 inches
MRC:
A numeric-alpha designator indicating established pitch and crest diameter tolerance position and grade.CTTC
Thread Tolerance Class:
3a external
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Threads are unjef series; has a 0.150 wide grove located above the threads, diameter of grove area 0.971 to 0.981; contains 2 lockwire holes 0.046 diameter located 180 degrees apart in the wrenching faclity end, 0.065 from the top edge and 0.078 from the outside edge; threaded end outside edge chamfered 45 degrees x 0.045
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Sae-ams-qq-a-225/8 federal specification single material response
