부품 정보
Bearing material: stainless steel; gear material: aluminum alloy 5052; drum surface treatment: anodized; outersurface of drum surface treatment: anodized
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Unable To Decode:
Unable to decode and unable to decode
MRC:
An overall measurement between specified points of an item,in distinction from height.ABFY
Overall Depth:
0.203 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the shaft accommodation.ABHH
Shaft Accommodation Style (non-core):
Err-090
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
0.8625 inches
MRC:
The means used to attach the item.ABSX
Attachment Method:
Press fit and hole
Drum Height:
Between 0.200 inches and 0.203 inches
MRC:
The order of the numeric scale markings of the dial.ABWD
Scale Direction And Range:
0 to 9 clockwise single scale
MRC:
The distance and type covered by the scale inscription range.ABWE
Scale Distance And Type:
Err-070
MRC:
The number of scale divisions.ABWG
Scale Division Quantity:
10 single scale
MRC:
The number of turns of the dial in relation to one turn of the knob or other actuating mechanism.ABWS
Drive Ratio:
1.0 single
MRC:
Indicates the type of drive for turning,rotating,or positioning the mechanism.AKCV
Drive Type:
Gear
MRC:
Indicates the type of scale.ATEQ
Scale Type:
Linear single scale
MRC:
Indicates the type of mechanism used for positioning the item.CRRL
Positioning Mechanism Type:
Drum
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.200 inches and 0.203 inches
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Err-070
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Err-070
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Drum
