부품 정보
Two 0.094 in. Min, 0.097 in. Maximum diameter holes spaced 0.664 in. And 1.110 in. From first end, two 0.029 in. Min, 0.032 in. Maximum w grooves spaced 1.280 in. And 1.560 in. From second end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Unthreaded cross drilled
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Two circular grooves
Second End Groove Width:
Between 0.0290 inches and 0.0320 inches
Second End Groove Diameter:
Between 0.2880 inches and 0.2920 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
3.125 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 0.3145 inches and 0.3150 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the first end,and terminates at the circumference.AMDX
First End Hole Diameter:
Between 0.0940 inches and 0.0970 inches
First End Distance From Hole Center To End:
Between 0.216 inches and 0.220 inches
Second End Distance From End To Groove:
0.125 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 0.3145 inches and 0.3150 inches
Second End Distance Between First And Second Groove Centers:
Between 0.557 inches and 0.564 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 302 or steel comp 304
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-w-423, form 1, condition a federal specification single material response or qq-s-763 condition a, class 1, type d federal specification single material response
