부품 정보
Part name assigned by controlling agency is wear ring
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Internal flange
MRC:
A measurement of the longest dimension of the chamfer,in distinction from width.AAZP
Chamfer Length:
0.090 inches outside right corner and 0.150 inches outside right corner
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 1.350 inches and 1.410 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
Between 6.753 inches and 6.754 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
Between 6.270 inches and 6.272 inches
MRC:
A measurement of a straight line from the midpoint of a rounded corner to its periphery.ADNU
Corner Radius:
0.220 inches inside right corner and 0.280 inches inside right corner
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
USED-ON-930-16C4
End To Flange Distance:
0.940 inches
Internal Flange Inside Diameter:
Between 5.470 inches and 5.530 inches
Internal Flange Outside Diameter:
Between 5.590 inches and 5.650 inches
Internal Flange Width:
Between 0.410 inches and 0.470 inches
Internal Flange Lip Width:
0.250 inches
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Chamfered outside right corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Round inside right corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square inside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square outside left corner
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches inside
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches left face
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches right face
MRC:
The included angle of the chamfer(s).CSYT
Chamfer Angle:
14.0 degrees outside right corner and 16.0 degrees outside right corner
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy 836
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm b584 assn standard single material response or sae j461 assn standard single material response
