부품 정보
Threads are 0.750-10 unc on both ends.
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Circular grooved and externally threaded
First End Groove Width:
0.0930 inches
First End Groove Diameter:
0.6150 inches
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Circular grooved and externally threaded
Second End Groove Width:
0.0930 inches
Second End Groove Diameter:
0.6150 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
33.5500 inches
First End Distance From End To Groove:
0.8800 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
0.7480 inches
First End External Thread Length:
0.8800 inches
Second End Distance From End To Groove:
0.1600 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
0.7480 inches
Second End External Thread Length:
0.1600 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
4
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
2.0030 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper
MRC:
The measured weight of the actual container(s) or supporting device(s) which is in direct contact with the item and its contents.SUWT
Unit Of Issue Weight:
17.00 pounds
