부품 정보
Drill-hammer, electric
TXT
묘사:
Portable Electric Drill-hammer
MRC:
The different speeds at which the item may be operated.ABBB
Speed Adjustments:
Variable speed
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
13.000 inches
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
The alternating current rating for which the item is rated,expressed in amperes.ACUS
Alternating Current Rating In Amps:
7.5
MRC:
The number of complete cyclic changes,per unit of time,for which an item is rated.ACZB
Frequency Rating:
60.0 hertz
MRC:
The number of impact blows which the item will make within a specific period of time.AKUL
Impact Blows Per Minute:
40000.0
MRC:
The name and number of parts supplied with the item which may be required for application.AKYD
Accessory Components And Quantity:
Side handle, depth rod, chuck key and case
MRC:
A designation indicating the size by which the item is commercially known and/or identified.AMRN
Size Designator:
0.500 inches
MRC:
The value(s) of potential for which the item is rated.AMSE
Voltage Rating:
120.0 volts
MRC:
A measurement of the longest dimension of a cord,in distinction from width.BQMM
Cord Length:
8.000 feet
MRC:
Indicates the type of drive end provided.BRZR
Drive End Type:
Keyed jaw chuck
MRC:
The speed at which an item can be operated under a no load condition,expressed in revolutions per minute.BRZT
No Load Speed In Rpm:
2500.0
MRC:
An indication of the drive for which the item is designed.BRZX
Drive For Which Designed:
Straight
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Reversible
MRC:
The total electrical voltage,expressed in volts,and the type of current whether alternating or direct.CSBH
Voltage In Volts And Current Type:
120.0 ac
MRC:
The number of alternating current phases.FAAZ
Phase:
Single
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Two speed ranges, 0 to 1350/0 to 2500 rpm; 0 to 20000/0 to 40000 bpm; 1/2 in. Steel (twist bit), 3-3/4 in. Wood (hole saw) capacity
